Judging:
For the 1999/00 contest year aircraft will be designed to complete multiple mission sorties within a timed flight period.

Each team must also submit a written Design Report, which is divided into two phases as noted in the documentation requirements section. A maximum of 100 points will be awarded for the team design report. (One score will be given accounting for both sections.) Scores for the written reports will be announced at the beginning of the fly-off.

The overall team score is a combination of the paper and flight scores. The team with the highest overall team score will be declared the winner.

Contest Site:
Host for the competition will be Cessna Aircraft Company. The fly-off will be held in Wichita Kansas. It is highly recommended that teams consider Wichita weather (wind) conditions during the aircraft design phase.

Team Requirements:
All team members (except for a pre-approved designated pilot) must be full time students at an accredited University or College and student members of the AIAA. The team must be composed of both under classmen and upper classmen, with at least 1/3 of the members being under classmen (Freshman, Sophomores or Juniors). The pilot must be an AMA (Academy of Model Aeronautics) member. Teams may use a non-university member for the pilot if desired. Such a designated pilot must be from the team's local area, and pre-approved by the contest officials. We will also provide qualified pilots on the contest day for any teams who are unable to have their pilot attend.

Technical Assistance:
A non-exclusive list of some available suppliers for materials, R/C systems, electric motors and NiCad batteries is included in this package.

Past Reports:
A compendium of the entry technical reports from prior-year competitions is published by ONR through the NTIS. Individual entry reports are also available by request from the AIAA. All reports submitted become the property of AIAA, ONR, and Cessna.

Preferred access to the prior-year reports is through NTIS, However, individual reports may also be requested from AIAA (AIAA policy is to make all student competition reports available). Teams outside the US may not have access to the NTIS reports, so may need to contact AIAA for copies.

1996/97 Report:
2031840 NTIS Accession Number: AD-A329 477/4/XAB
Support of AIAA Student Aircraft Design/Fly Competition
(Final rept. 1 Apr-31 Dec 97)

Sponsorship:
Teams may solicit and accept sponsorship in the form of funds or materials and components from commercial organizations. All design, analysis and fabrication of the contest entry is the sole responsibility of the team members.

Schedule:
A completed entry form (electronic) is due to the contest administrator on or before 31 October 1999. Written reports for the PROPOSAL PHASE (5 copies), are due to the chief of scoring by COB 13 March 2000. Written reports for the ADDENDUM PHASE (5 copies), are due to the chief of scoring by COB 10 April 2000. Scores for the written reports will be announced at the beginning of the fly-off. The contest is scheduled for 22-23 April 2000.

Late submissions will not be judged. Teams who do not submit the required written reports will not be allowed to fly.

Communications:
The contest administration will maintain a World Wide Web site containing the latest information regarding the contest schedules, rules, and participating teams. The contest web site will also contain a list of potential suppliers for materials and equipment available to build an entry. The contest web site is located at:

http://www.aae.uiuc.edu/aiaadbf

All teams are required to provide a single point-of-contact e-mail address with their contest application.

Questions regarding the contest, schedules, or rules interpretation may be sent to the contest administrator by e-mail at:

gregory.s.page@nrl.navy.mil

The contest administrator will provide copies of all questions received and their answers to all teams of record.

Written reports (only) should be sent to the chief of scoring at:

Dr. David W. Levy
Cessna Aircraft Co
5701 E. Pawnee, MS 178 P
Wichita, KS 67218
email: dlevy@CESSNA.TEXTRON.COM
PHONE: (316) 831-2520
FAX: (316) 831-2828

Aircraft Requirements - General

• The aircraft may be of any configuration except rotary wing or lighter-than-air.
• Maximum wing span is 7 feet.
• Must be propeller driven and electric powered with an unmodified, over the counter model electric motor. May use multiple motors and/or propellers. May be direct drive or with gear or belt reduction. For safety, each aircraft will use a commercially produced propeller. Teams may modify the propeller diameter by clipping the tip.
• Must use over the counter NiCad batteries. For safety, battery packs must have shrink-wrap or other protection over all electrical contact points. The individual cells must be commercially available, and the manufacturers label must be readable (i.e. clear shrink wrap preferred).
• Maximum battery pack weight is 5.0 lb. Battery pack must power propulsion and payload systems. Radio Rx and servos (only) may be on a separate battery pack. Batteries may not be changed between sorties during a flight period.
• Aircraft and pilot must be AMA legal. This means that the aircraft TOGW (take-off gross weight with payload) must be less than 55 lb., and the pilot must be a member of the AMA. Since this is an AMA sanctioned event, the team must submit proof that the aircraft has been flown prior to the contest date (in flight photo or video).
  
  The pilot need not be a student at the represented university. Application for approval of a non-student pilot must be presented to the contest administrator for approval at least one month prior to the written report, PROPOSAL PHASE submission.

Aircraft Requirements - Safety

All vehicles will undergo a safety inspection by a designated contest safety inspector prior to being allowed to make any competition or non-competition (i.e. practice) flight. All decisions of the safety inspector are final. Safety inspections will include the following as a minimum.

1. Physical inspection of vehicle to insure structural integrity.
   • Verify all components adequately secured to vehicle. Verify all fasteners tight and have either safety wire, lock-tite (fluid) or nylock nuts.
   • Verify propeller structural and attachment integrity.
   • Visual inspection of all electronic wiring to assure adequate wire gauges and connectors in use. Teams must notify inspector of expected maximum current draw for the propulsion system.
   • Radio range check, motor off and motor on.
   • Verify all controls move in the proper sense.
   • Check general integrity of the payload system.
2. Structural verification. All aircraft will be lifted with one lift point at each wing tip to verify adequate wing strength (this is equivalent to a 2.5g load case) and to check for vehicle cg location. Teams must mark the expected empty and with payload cg location on the exterior of the aircraft fuselage. Special provisions will be made at the time of the contest for aircraft whose cg does not fall within the wing tip chord. This test will be made with the aircraft filled to its maximum payload capacity (Teams must inform the inspector and judges of their maximum design capacity and must make all flights within that capacity).
3. Radio fail-safe check. All aircraft radios must have a fail-safe mode that is automatically selected during loss of transmit signal. The fail-safe will be demonstrated on the ground by switching off the transmit radio. During fail safe the aircraft receiver must select:
   • Throttle closed
   • Full up elevator
   • Full right rudder
   • Full left aileron
   • Full Flaps down (if so equipped)

The radio Fail Safe provisions will be strictly enforced.

1. All aircraft must have a mechanical motor arming system separate from the onboard radio Rx switch. This may be a mechanical switch rated for the maximum current draw accessible from outside the aircraft, or can be a removable link such as an automotive "blade" style fuse. The aircraft Rx should always be powered on and the Tx throttle verified to be "closed" before activating the motor arming switch.

Mission Profile:

For the 1999/00 DBF contest, teams will alternate between two different sorties (flights) - a short-field cargo sortie and a cruise/ferry sortie. Teams may fly as many sorties as desired within the flight period, but must alternate between the sorties. Either sortie may be flown first. Each sortie will be assigned a score based on the table below. Note that only the short-field cargo sortie yields scoring points. The Single Flight Score is the sum of the score(s) for the individual sorties flown during a single flight period. The best three Single Flight Scores (may be reduced to two if restricted by weather) for each team will be summed for the team's Total Flight Score.

Each team's overall score will be computed from their Written Report Score, Total Flight Score, and the Rated Aircraft Cost using the formula:

Rated Aircraft Cost must be documented and included in the Addendum Report provided prior to the competition. (If not provided, a value of 100 will be used.)

No.	Score	Description
1	10*n	Short Field Cargo Sortie Carry 'n'-liters of water one lap of course. Water is to be carried in polyethylene 1 liter round bottles (full bottles only). Short field take-off (100 ft Max) Minimum aircraft capacity is 2 liters (may fly less than minimum capacity). Maximum aircraft capacity is 8 liters (may NOT fly more than maximum capacity). Aircraft structural test will be conducted at individual aircraft's maximum physical capacity. All payload must be carried internally in a fully faired, fully closed structure. Aircraft must complete a 360o turn in the direction opposite of the base and final turns on each downwind leg.
2	No Score	Cruise/Ferry Sortie Aircraft must complete 2 full laps of the course with no payload. This non-scoring return task must be completed before attempting another scoring sortie of task #1. Short field take-off (100 ft Max) 360 degree turn on downwind is not required for this task.

Coef.	Description	Value
A	Manufacturers Empty Weight Multiplier	$100 / lb.
B	Rated Engine Power Multiplier	$1 / watt
C	Manufacturing Cost Multiplier	$20 / hour
MEW	Manufacturers Empty Weight	Actual airframe weight, lb., without payload or batteries
REP	Rated Engine Power	# engines * 50A * 1.2 V/cell * # cells
MFHR	Manufacturing Man Hours	Prescribed assembly hours by WBS (Work Breakdown Structure). MFHR = S WBS hours WBS 1.0 Wing(s): 5 hr./wing. + 4 hr/sq. ft. Projected Area WBS 2.0 Fuselage and/or pods 5 hr/body. + 4 hr/ft of length WBS 3.0 Empenage 5 hr.(basic) + 5 hr./Vertical Surface + 10 hr./Horizontal Surface WBS 4.0 Flight Systems 5 hr.(basic) + 1 hr./servo WBS 5.0 Propulsion Systems 5 hr./engine + 5 hr./propeller or fan

Since the contest requires multiple sorties during each flight period; ground handling, take-off and landing are paramount design considerations.

• Teams may fly multiple sorties within a 10 minute flight period. For each new sortie the team must switch to the opposite task. The time to unload and reload the payload for the next sortie is part of the flight period.
• Aircraft will be brought to the flight line to begin the flight period with the payload for the first sortie (mission task) already loaded. Teams will be given a maximum of 2 minutes to place their aircraft on the starting line and prepare for competition before the judges start the timed flight period.
• The aircraft payload must be emptied or reloaded before each additional sortie. Aircraft propulsion system(s) must be disarmed or "safed" during all payload changes.
• Sorties may be repeated as many times as possible provided the aircraft has passed the downwind turn pylon before the time limit for the flight period ends.
• Maximum flight support crew is: pilot, observer and 3 ground crew. Only the designated ground crew may conduct the unloading/reloading. Pilot and observer may be members of the ground crew, provided total ground crew size remains 3 people.
• The upwind turn will be made after passing the upwind pylon. The downwind turn will be made after passing the downwind pylon. Upwind and downwind pylons will be 500 feet from the starting line. Aircraft must be "straight and level" when passing the pylon before initiating the turn.
• Aircraft must land on the paved portion of the runway. Aircraft may "run-off" the runway during roll-out.
• After landing, aircraft will taxi back to the starting line to unload their payload, and reload for the next sortie. Wing-Walkers are allowed to accompany the plane during the taxi, but must wait at the starting line until the aircraft comes to a complete stop before going to assist the aircraft.
• Aircraft that run off the runway during landing may be carried back to the runway by the ground crew to taxi back to the starting line. Aircraft that leave the runway will be returned to the runway at the nearest possible location.
• Aircraft unable to taxi back to the starting line due to landing damage may be carried by the designated ground crew. Ground crew members will not be allowed to leave the starting line to retrieve the aircraft until the aircraft has stopped.
• Aircraft experiencing minor landing damage may be repaired and fly additional sorties within the flight period. Repairs must be made on the starting line, and may not begin until the payload has been unloaded. Repairs must be completed before the payload is reloaded for the next sortie. All team members may assist in repairs, only ground crew members may reload the aircraft.
• Aircraft will be considered to have only minor damage if they can be repaired and presented as flight worthy within 30 minutes of the end of that flight period. Aircraft with only minor damage will be credited with their full Single Flight Score.
• Aircraft which can be repaired during the competition, but not within 30 minutes of the flight period, will NOT be credited with a score for the last sortie flown, but will receive full credit for any prior sorties.
• Flight altitude must be sufficient for safe terrain clearance and low enough to maintain good visual contact with the aircraft. Decisions on safe flight altitude will be at the discretion of the flight line judges and all rulings will be final.

Additional information is included in the FAQ (Frequently Asked Questions).

Design Report:

Each team will submit a judged design report as outlined below. The design report will be submitted in two sections. Submission dates are contained in the schedule section of this document. Reports must be bound in some manor (simple spiral bindings are sufficient and preferred, 3-ring binders are discouraged). Both the Proposal and Addendum reports must contain the same cover, title page, and table of contents. All information used for scoring must be in the outlined sections. Sections exceeding the page limits will be scored as "zero". Appendices may be included if desired, but WILL NOT BE INCLUDED DURING JUDGING.

1. Executive Summary: (Maximum 3 pages, 5 points): Provide a summary of the development of your design. This should be a narrative description highlighting the major areas in the development process for your final configuration and a broad description of the range of design alternatives investigated. Include an overview of the design tools used for each phase of the design development: conceptual design, preliminary design, and detailed design.
   
   
2. Management Summary (Maximum 2 page, 5 points): Describe the architecture of the design team. Provide a list of design personnel and assignment areas. Document the management structures used for personnel assignments, schedule control, and configuration control. Include a (single) milestone chart showing planned and actual timing of major elements of the design process, including as a minimum the conceptual design stage, preliminary design stage, detailed design stage, and report preparation periods.
   
   
3. Conceptual Design (Configuration Selection, Maximum 10 pages, 20 points): Document the alternative concepts investigated during the conceptual design stage. Detail the design parameters investigated, and why each was felt to be important. Describe the figures of merit (FOM's) used to screen competing concepts, and the mission feature each FOM was selected to support. Include the value for Rated Aircraft Cost assigned to each concept during the FOM screening process. Describe the analytic methods used during the conceptual design stage, the expected accuracy and why each was selected for this design phase. Numerical data need not be extensive at this stage, but should include as a minimum a final ranking chart giving the quantitative value of each design for each FOM, the FOM importance factors or ranking, and an explanation of the features that produced the final configuration selection.
   
   
4. Preliminary Design (Performance Estimation and Vehicle Sizing, Maximum 5 pages, 20 points): Document the design parameter and sizing trades investigated during the preliminary design stage. Detail the design parameters investigated, and why each was felt to be important. Describe the FOM's used and the mission or design feature each FOM supports. Describe the analytic methods used during the preliminary design stage, the expected accuracy and why each was selected for this design phase. Numerical data will be more extensive at this stage, and should include as a minimum configuration and sizing parameter values sufficient to justify the selection of the final value chosen for each of the major design and sizing parameters. Include a summary of the key features that distinguish the final configuration.
   
   
5. Detail Design (Final Design, Drawings and Performance Predictions, Maximum 10 pages Plus Drawing Package, 20 points): Final performance data should be provided for the design, including take off performance, handling qualities and g load capability, range and endurance, and payload fraction. Component selection and systems architecture should be included in this section. The Drawing Package must contain as a minimum a 3-view drawing of the design in sufficient detail to indicate aircraft size and configuration, primary structure component size and location, and location of propulsion and flight control system components.
   
   
6. Manufacturing Plan (Materials Selection and Fabrication Processes, Maximum 5 pages, 10 points): Document the process selected for manufacture of major components and assemblies of the final design. Detail the manufacturing processes investigated, and describe the FOM's used (including but not limited to: availability, required skill levels and cost) to screen competing concepts. Describe the analytic methods (cost, skill matrix, scheduling time lines) used to select the final set of manufacturing processes. Include a manufacturing milestone chart showing scheduled event timings.

1. Lessons Learned (Maximum 5 pages, 10 points): Document any areas where the final contest aircraft differs from the PROPOSAL design. Also identify areas for improvement in the next design and manufacturing process implementation.
2. Aircraft Cost (Maximum 5 pages plus table, 10 points) Document your final competition aircraft's Rated Aircraft Cost using the contest supplied cost model. Provide a table indicating values for each airframe dependent parameter in the cost model. Provide a table listing manufacturing hours broken down by the supplied WBS structure.

Notes:

· Page counts do not include figures or tables. Figures and tables should be placed at the end of the text for a given section.

[Top] [AIAA Student Design/Build/Fly Competition homepage][AIAA Homepage]
Webmaster m-selig@uiuc.edu